• Juganu J.Protect Products

    INDOOR Intelligent Lighting Platform and Fixtures that

    LIGHT, SEE, THINK, CONNECT, & PROTECT

    Juganu J.Protect Allegro & Presto Series C Fixtures

    Standard Ceiling Environments

    A multi-functional Luminary with General Lighting, JMix UVA for Continuous Protection and a UVC Mode for Fast Disinfection*.


    J. Protect C is designed for standard ceiling grid height, such as Office environments, open spaces and recessed ceiling.

     

    *Optional: JMix with UVA Only, Excluding UVC - Click Here

    Juganu J.Protect Allegro & Presto Series H Fixtures

    High Ceiling Environments

    A multi-functional Luminary with General Lighting, JMix UVA for Continuous Protection and a UVC Mode for Fast Disinfection.

     

    J.Protect H is designed for high ceilings, such as Warehouses Environments, Retails Spaces and Supermarkets.

     

    *Optional: JMix with UVA Only, excluding UVC - Click Here

    Juganu J.Protect Allegro & Presto Series S Fixtures

    All Types of Environments

    A multi-functional Luminary with General Lighting, JMix UVA for Continuous Protection and a UVC Mode for Fast Disinfection.

     

    J. Protect S is designed for small rooms and smaller spaces such as Hotel Rooms, Small Bathrooms, and for places where fixtures size is limited by space.

     

    *Optional: JMix with UVA Only, excluding UVC - Click Here

    J.Protect Presto – UV-C Operation Overview

    The Presto line of the Juganu J.Protect products have the capability for fast disinfection of spaces using UV-C. However, in order to activate the UV-C, where safety is our #1 concern, the process is done by an ‘Operator’ within the space.

  • Juganu J.Protect UV-C Operations Process Flow

    Once the 'Operator' and PIRS devices confirm there is no one in the space, below describes the process highlighted in above diagram:

    1. Operator using mobile device connects to the Room Controller

     

    2. Room Controller communicates with all PRESTO light fixtures within the space to confirm that the embedded Passive Infrared Sensors (PIRS) is working properly

     

    3. The PIRS communicate with the Room Controller that they are operational and that no one is within the space

     

    4. The Room Controller sends a confirmation to the operator mobile device that the embedded PIRS are operational and that UV-C disinfection can be commenced

     

    5. Operator confirms start of UV-C disinfection and has X seconds or minutes to vacate the space

     

    6. PRESTO light fixtures turn ‘RED’ in order to indicate that UV-C disinfection is in process

    All Posts
    ×